The fence-mounted sensor line supersedes and outperforms all types of fence sensors in reliability combined with detection ability and price. The electronic shock vibration fence sensor cable is the most reliable, advanced sensor cable perimeter security system in the world. Its unique capability provides multiple levels of sensitivity and accurate response to a certain type of vibration frequencies on the fence caused by cutting, climbing, or lifting 360 degrees around the sensor in three axes.
The sensor is supplied, tested, and pre-assembled in 3m/10ft intervals. Installation of the Multidirectional sensor cable is very fast and simple. Ready to mount into any new or existing type of perimeter fence: wire, chain link, welded mesh, razor-type coil, larded wire.
Field proven sensor is maintenance-free due to its 10 gold plates contact points assuring a minimum of 10 years of operation, is self-cleaning, and self-capability allowing a very low false alarm rate.
Highlights of Sensor or radar-based solutions:
- Multiple levels of sensitivity.
- Maintenance-free, the Sensor is ultrasonically welded NOT glued.
- Self-adjusting capability no calibration needed.
- Automatic contact cleaning capability.
- Can be installed on any type of fence and at any angle.
- 10 Years warranty for the sensor cable, over 20 years life span.
We also offer maritime-based systems security fences which are fully wrapped by stainless steel mesh Ideal for installation on wire fences and concertina coil. The system utilizes 3 layers of false alarm filtration – An algorithm of detection, 22 levels of sensitivity easily adjusted with dip switches, and a weather station to avoid false alarms caused by weather conditions.
The sensor cable can be installed on a fence of any kind, or similar tile roof, light walls, or solar power panels and be connected to any standard alarm system panel, SCADA or DVR.
Highlights of maritime-based systems security fences
- 3 Layers of False Alarm Filtration – Extreme low false alarm rate.
- No training or special tools are needed, comes with the installation manual.
- No calibration – The system self-calibrates.
- Maintenance free – 2 years warranty on the sensor cable.
- 22 Levels of sensitivity per zone easily adjusted with dip switches.
- Dry contact relay outputs (NO or NC), can be connected to any alarm system/DVR.
- Ideal for installation on chain link fences or concertina coils.
Technology-led | Secure | Complete |
We offer biometric and card-based access as well as photo-electric solutions, outdoor video, and video recording. | We offer fiber-based security fences, ground-based radar systems, maritime-based systems, K-rated gates, and more. | Our industry-leading solutions are configured to your needs. Let us know if you need automobile barriers, personnel access systems or something else. |
The sensor is supplied, tested, and pre-assembled in 3m/10ft intervals. Installation of the Multidirectional sensor cable is very fast and simple. Ready to mount into any new or existing type of perimeter fence: wire, chain link, welded mesh, razor-type coil, larded wire.
Field proven sensor is maintenance-free due to its 10 gold plate contact points assuring a minimum of 10 years of operation, is self-cleaning, and self-capability allowing a very low false alarm rate.